Lawn Sign Holder with Monogram Corner

How to order

Our Lawn Sign Holders were designed to complement our engraved hanging custom name and number signs and engraved stock signs.

This design has a customizable monogram accent in the top corner.

Our Lawn Sign Holders are created using all UV-protected PVC parts designed for outdoor use.

Specifications:

  • Overall height: 45″
  • Arm length: 20″
  • Thickness: 1 1/2″
  • Sign limits: 13 1/2″ wide x 12″ deep approximately
  • Ask us about customizing this Lawn Sign Holder design
  • Engraved plaque sold separately

Click for pricing.

(Please note, prices do not include shipping and handling and applicable taxes.)


How to install your Lawn Sign Holder

  1. It is advisable to check for underground utility lines before you begin digging. This can be done by calling 811 underground services.
  2. Orient the sign in the location and direction that you wish it to face.
  3. Gently tap the steel pole into position.
  4. Remove the Lawn Sign Holder.
  5. With a hammer tap the steel pole into the ground until the wide arrow point is buried below ground.
  6. Use a flat screwdriver to pry open the tabs on the pole; this will make for a more snug fit. Be careful not to open the tab too far as the lawn sign will not slide down the pole.
  7. Slide the Lawn Sign Holder over the tabs and finish at the bottom plate of the steel pole.

To apply your sign

  1. Slip the eye hooks on the sign over the “S” hooks on the arm.
  2. Use a vice grips to squeeze the “S” hooks closed. This will prevent the wind or other elements from releasing the sign from the arm.

What other customers have done

[pjc_slideshow slide_type=”lawn-signs”]