About the Bird Towers
The Bird Tower is a very unique and beautiful combination of bird feeder and birdhouse all in one. You can enjoy watching the birds fly back and forth, bringing materials to build their nest inside as well as feed out of eight separate openings.
The lower cutouts can be used in a variety of ways, including for bird seed or a suet block. If you prefer not to fill it with seed, it can alternatively be used for an LED candle, as a planter (see our plant suggestions), or to house seasonal decorations. You are only limited by your imagination.
The Bird Tower is made from PVC and topped off with our signature roof design in durable, oil-finished and varnished western red cedar (as pictured above).
We also offer the tower with painted roofs. Ask us if you desire a special color. There will be an additional charge for custom painting.
The tower is designed with a decorative base trim that will fit over a standard 4″ x 4″ PVC post*. We also include the decorative knuckle. The body is made from a 5″ x 5″ PVC extrusion with our stylish gothic cut-out on front and back. On top is a 1 3/8″ entrance hole to the birdhouse. The sides are 4″ x 4″ feeders made with PVC and with a protective roof over each one. They have an internal base plate that includes drainage holes. The feeders are glued and riveted in place.
*Please note: A 4″ x 4″ PVC post is optional. We can supply it for an additional cost (contact us) or you can purchase it from a local big box store or fence company. This would also fit over a 3 ½” x 3 ½” wood post.
Cleaning: To clean out the birdhouse once your feathered friends have moved on, the roof can be removed by unscrewing the four screws with a #2 square drive bit.
Overall height: 21 1/2″
Overall width: 15″
Roof depth: 6 1/2″
Roof span: 7 1/2″
Feeder: 4″ x 4″ x approximately 3″ deep
Bird house entry: 1 3/8″
Customize your Bird Tower
We can offer custom color roofs on our Bird Towers for an additional small fee (Product code: CPR. Click for pricing).